Technique Parameter
Step Angle | 1.8° |
Kulondola kwa Step Angle | ± 5% (gawo lonse, palibe katundu) |
Kutsutsa Kulondola | ±10% |
Kulondola kwa Inductance | ±20% |
Kutentha Kukwera | 80°CMax.(ovoteredwa panopa, 2 gawo pa) |
Ambient Kutentha | -10°C~+50°C |
Kukana kwa Insulation | 100MΩMin.500 VDC |
Mphamvu ya Dielectric | 500VAC kwa mphindi imodzi |
Shaft Radial Play | 0.06Kuchuluka (450 g-katundu) |
Masewera a Shaft Axial | 0.08Kuchuluka (450 g-katundu) |
Mndandanda wa mayina amtundu wa DW42HS (Mkulu wa Torque)
Chitsanzo No | Panopo/Gawo | Kukaniza / Gawo | Inductance/Phase | Kugwira Torque | #Za Otsogolera | Rotor Inertia | Detent Torque | Kulemera | Utali | ||
A | Ω | mH | Oz-mu | Kg-cm | gcm2 | (kg.cm) | Kg | mm | mm | ||
Mtengo wa 42HS25-0804 | 0.80 | 3.7 | 5 | 21 | 1.5 | 4 | 20 | 150 | 0.24 | 25 | Φ5*24 |
Chithunzi cha 42HS25-0404 | 0.40 | 24 | 36 | 24 | 1.7 | 4 | 20 | 150 | 0.24 | 25 | Φ5*24 |
Chithunzi cha 42HS34-0404 | 0.40 | 30 | 37 | 36 | 2.6 | 4 | 35 | 200 | 0.24 | 34 | Φ5*24 |
Mtengo wa 42HS34-0226 | 0.22 | 55 | 30 | 19.44 | 1.4 | 6 | 35 | 200 | 0.24 | 34 | Φ5*24 |
Mtengo wa 42HS34-0804 | 0.8 | 6.5 | 4.6 | 31.94 | 2.3 | 4 | 35 | 200 | 0.24 | 34 | Φ5*24 |
Chithunzi cha 42HS34-1704 | 1.7 | 1.2 | 1.5 | 30.55 | 2.2 | 4 | 35 | 200 | 0.24 | 34 | Φ5*24 |
Chithunzi cha 42HS34-2004 | 2 | 0.7 | 1.1 | 34.72 | 2.5 | 4 | 35 | 200 | 0.24 | 34 | Φ5*24 |
Mtengo wa 42HS34-0586 | 0.58 | 13.6 | 7.8 | 28 | 2 | 6 | 35 | 200 | 0.24 | 34 | Φ5*24 |
Mtengo wa 42HS34-1334 | 1.33 | 2.1 | 2.5 | 31 | 2.2 | 4 | 35 | 200 | 0.24 | 34 | Φ5*24 |
Chithunzi cha 42HS34-0406 | 0.40 | 30 | 21 | 35 | 2.5 | 6 | 35 | 200 | 0.24 | 34 | Φ5*24 |
Mtengo wa 42HS40-0806 | 0.80 | 7.5 | 6.7 | 36 | 2.6 | 6 | 54 | 220 | 0.27 | 40 | Φ5*24 |
Mtengo wa 42HS40-1206 | 1.20 | 3 | 3.2 | 36 | 2.6 | 6 | 54 | 220 | 0.27 | 40 | Φ5*24 |
Mtengo wa 42HS40-1704 | 1.70 | 2 | 3 | 47 | 3.4 | 4 | 54 | 220 | 0.27 | 40 | Φ5*24 |
Mtengo wa 42HS48-0406 | 0.40 | 30 | 25 | 44 | 3.2 | 6 | 76 | 280 | 0.34 | 48 | Φ5*24 |
Mtengo wa 42HS48-0806 | 0.80 | 7.5 | 6.3 | 44 | 3.17 | 6 | 76 | 280 | 0.34 | 48 | Φ5*24 |
Mtengo wa 42HS48-1204 | 1.20 | 3 | 5 | 62 | 4.5 | 4 | 76 | 280 | 0.34 | 48 | Φ5*24 |
Mtengo wa 42HS48-1684 | 1.68 | 1.65 | 2.8 | 61 | 4.4 | 4 | 76 | 280 | 0.34 | 48 | Φ5*24 |
Mtengo wa 42HS48-0186 | 0.18 | 120 | 90 | 42 | 3 | 6 | 76 | 280 | 0.34 | 48 | Φ5*24 |
Mtengo wa 42HS48-0304 | 0.3 | 54 | 98 | 70 | 5 | 4 | 76 | 280 | 0.34 | 48 | Φ5*24 |
Mtengo wa 42HS48-0606 | 0.6 | 19.5 | 13.5 | 53 | 3.8 | 6 | 76 | 280 | 0.34 | 48 | Φ5*24 |
Mtengo wa 42HS48-1006 | 1 | 4.3 | 4.2 | 44 | 3.2 | 6 | 76 | 280 | 0.34 | 48 | Φ5*24 |
Mtengo wa 42HS481504 | 1.5 | 2.6 | 5.5 | 83 | 6 | 4 | 76 | 280 | 0.34 | 48 | Φ5*24 |
Chithunzi cha 42HS48-2004 | 2 | 1.5 | 3 | 60 | 4.3 | 4 | 76 | 280 | 0.34 | 48 | Φ5*24 |
Mtengo wa 42HS48-3004A | 3 | 0.5 | 0.8 | 58 | 4.2 | 4 | 76 | 280 | 0.34 | 48 | Φ5*24 |
Mtengo wa 42HS48-250 | 2.50 | 1.25 | 1.8 | 67 | 4.8 | 4 | 76 | 280 | 0.34 | 48 | Φ5*24 |
Mtengo wa 42HS60-1206 | 1.20 | 6 | 7 | 90 | 6.5 | 6 | 102 | 350 | 0.5 | 60 | Φ5*24 |
Malangizo: kukula kwa stepper motor ndi screw zitha kugulidwa.
Mafotokozedwe a screw screw
Diameter | mtunda wautali (mm) | kuyamba | kutalika kwa sitepe(mm) | Mtundu wamagalimoto oyenera |
M5 | 1.6 | 2 | 0.008 | 42HSL-E, 42HSL-N |
Tr5 | 2 | 2 | 0.01 | 42HSL-E, 42HSL-N |
Tr6.5 | 3 | 2 | 0.015 | 42HSL-E, 42HSL-N |
tr8 | 1 | 1 | 0.005 | 42HSL-E, 42HSL-N |
tr8 | 2 | 1 | 0.01 | 42HSL-E, 42HSL-N |
tr8 | 4 | 2 | 0.02 | 42HSL-E, 42HSL-N |
tr8 | 8 | 4 | 0.04 | 42HSL-E, 42HSL-N |
Tr10 | 2 | 1 | 0.01 | Mtengo wa 42HSL-E |
Tr10 | 4 | 2 | 0.02 | Mtengo wa 42HSL-E |
Miyeso yamtundu wakunja (mm):
Makulidwe amtundu wosagwidwa (mm):